Home » 2018 » May » 07 » Basic information about Tree removal
10:45 AM
Basic information about Tree removal

Trees make up most of our environment. Trees conservation is important and you can avoid cutting down certain types of trees. Cutting trees is not very hard and anyone can handle it. This is because every tree requires a unique style when it is being fell depending with its surroundings. Tree cutting should be safe and fell trees should not destroy properties. This article gives tree removal tips that can fell trees anywhere on earth.

Safety

This is the first and the most important tip that anyone should get it right. Safety comes first when cutting trees unless you are committing suicide. Safety precautions when cutting trees include wearing protective gear and using the chainsaw in the right manner. Stationing yourself in the opposite direction of the lean of the tree helps prevent the tree from crushing you. Also, do not cut a tree in a hurry because you might end up hurting yourself.

Use the right tools

It is obvious you cannot fell a tree using bare hands or other mediocre tools. Therefore, it is important to invest in the right tools for the job. Tools necessary to cut a tree include; a chainsaw, rope, protective clothing (protective glasses and leg covers).  Learn how to use a chainsaw before using it. This will equip you with skills that will prevent any injuries from occurring. Sharpen the chainsaw and test it before cutting a tree.

The cutting process

Tree removal or Stump grinding is as simple as it seems. However, factor in some factors before felling a tree. The most important ones are; height, lean of the tree and the surroundings. The height will help you determine where you will tie your knot. The lean of the tree will help you decide the best direction to fell the tree and the surroundings will help you assess damage that the tree can cause and how to avoid them.

After determining where to tie the knot and the direction to fell the tree, position yourself in the opposite direction, start the chainsaw, let it warm for a few minutes then cut a V shape in the trunk of the tree starting with the side that the tree should fall. As you cut the tree remember the trunk can snap thus you should consider all the safety precautions.

Views: 7 | Added by: Jmcclane | Tags: stump removal, stump grinding, Tree trimming, Tree Removal | Rating: 0.0/0
Total comments: 0
avatar